3D Cell Floater Dish 9.40cm²

Culture flasks of SPL Life Sciences are ergonomically designed for easy handling, while achieving minimal contamination during cell culture. Short, wide and angled neck design enables easy access of serological pipettes and cell scrapers.

Case 100 flasks.

0.1 ml Low profile, Semi-skirted 96-well PCR plate with elevated skirt for ABI.

• 96 well x 0.1 ml
• Low profile
• Single notch corner at A1
• Fits ABI Fast Cyclers
• Thin wall design for efficient heat transfer
• Exceptional clarity for maximum sample visibility
• Raised wells for optimum seal and minimized evaporation
• Semi-skirted design allows for barcoding and labeling
• Elevated skirt around plate provides optimum fit with ABI blocks
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	20 Plates
  Volume	0.1 ml
  Color	Clear

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 5

1.1 ml 96-well Deep Well Plate. U-Bottom with Round Wells, Clear.

• 1.1 ml capacity. U-Bottom, Round Wells, Clear
• Ultra-low profile for reduced space requirements
• Ideal for high-throughput screening, sample collection, and long-term storage
• Ultra-smooth, polished U-Bottom Wells help minimize sample loss
• Ultra-flat surface ensures optimum seal with films and mats
• Extremely resistant to subzero temperatures, up to -80°C
• Centrifugation up to 4,000 RCF
• Standard SBS footprint
• Autoclavable
• Stackable 

Certified DNase and RNase free. Non-pyrogenic.

Culture flasks of SPL Life Sciences are ergonomically designed for easy handling, while achieving minimal contamination during cell culture. Short, wide and angled neck design enables easy access of serological pipettes and cell scrapers.

10 ul Filtered Tip. Low Retention. Sterile.

• Racked in 96-well format
• Exceptional clarity for maximum sample visibility
• Aerosol barrier tip prevents aerosol and liquid contamination
• Graduation marks allow for visual confirmation of draw volume
• Engineered to fit most universal single and multi-channel Pipettors
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase free and non-pyrogenic
• Low Retention for maximum sample recovery
• Pre-sterilized by gamma irradiation

• Packaging	96 Tips/Rack. 10 Racks per Unit
  Volume	10 ul
  Color	Clear

0.2 ml Semi-skirted 96-well PCR plate with elevated skirt for ABI.

• 96 well x 0.2 ml
• Standard profile
• Single notch corner at A12
• Fits ABI Standard Cyclers and Sequencers
• Thin wall design for efficient heat transfer
• Exceptional clarity for maximum sample visibility
• Raised wells for optimum seal and minimized evaporation
• Semi-skirted design allows for barcoding and labeling
• Elevated skirt around plate provides optimum fit with ABI blocks
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	10 Plates
  Volume	0.2 ml
  Color	Clear

0.1 ml Low profile 8-strip Tubes and 8-strip optically clear, flat Caps.

• Thin wall design for efficient heat transfer
• Optically clear, flat Caps for real-time PCR
• Secure cap fit ensures minimum evaporation
• Exceptional clarity for optimum real-time PCR/qPCR results
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Manufactured with 99.9% pure virgin polypropylene
• Designed to fit Bio-Rad® CFX systems
• Compatible with ABI® Fast systems
• Compatible with a variety of real-time instruments that take 0.1 ml 8-strip Tubes

• Packaging	120 Strips
  Volume	0.1 ml
  Color	Clear
  Cap Type	Optically clear for qPCR

SPL Serological Pipettes are classified by sample volume.

Ascending & descending scales facilitate reading of both dispensing and remaining volume.

Case 400 pipettes

0.2 ml PCR Tube with attached frosted, flat Cap.

• Thin wall design for efficient heat transfer
• Frosted, flat Cap with writeable surface for standard PCR.
• Clear Tube with exceptional clarity for maximum sample visibility
• Secure Cap fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• 0.2 ml PCR Tube with attached frosted, flat Cap.

Novas Bio Silicone Sealing mats are designed for high throughput screening and storage applications. Made of research-grade silicone, these Mats can be autoclaved, and following a bleach wash and ethanol rinse protocol, they can also be reused. Silicone Sealing Mats, pierceable and self-sealing, are ideal for automated processes and can also be used in subzero environmen

0.1ml Hard Shell PCR Plate. Skirted. Low Profile. White frame, White wells. RNase/DNase/Human DNA free/Non-pyrogenic.

• 200 ul Filtered Tip. Fine point.
• Racked in 96-well format
• Manufactured with 99.9% pure virgin polypropylene
• Aerosol barrier tip prevents aerosol and liquid contamination
• Graduation marks allow for visual confirmation of draw volume
• Engineered to fit most universal single and multi-channel Pipettors
• Low Retention tip
• Certified DNase/RNase free and non-pyrogenic
• Pre-sterilized by E-Beam irradiation

The 3D CellFate® matrices developed by Biocelltis are biomaterials made up by natural polymeric nanofibers from 50 to 100nm in diameter, similar to human collagen, biocompatible, sterile and ready-for-use, ideal for growing human and animal cells in research labs. Biocelltis offers 3D CellFate® matrices for a wide range of shapes and sizes of culture plates for routine use in laboratories, in addition to customized solutions.

AHN myLab® Mini Vortex is the perfect choice for laboratories for general mixing applications in individual test tubes of the diameter not exceeding 30 mm. AHN myLab® Mini Vortex Mixer has a variable speed reaching the maximum of 4500 rpm.

0.65 ml Clear Snap-lock Microcentrifuge Tube.

• 0.65 ml volume
• Thumb-friendly Snap-lock Cap provides tight seal, yet remains easy to open
• Frosted, flat Cap and frosted panel on Tube with writeable surfaces
• Manufactured with 99.9% pure virgin polypropylene
• Graduation marks molded in place for accuracy
• Perfect clarity facilitates visibility of pellet
• Ultra smooth tube bottoms
• Autoclavable

Certified DNase and RNase free. Non-pyrogenic.