Optically clear sealing film, acrylic adhesive. For qPCR and standard PCR.

The SF-UC-500 combines an optically clear polyolefin layer with a strong, ultra-smooth, non-absorbing, non-fluorescing medical-grade silicone adhesive for superior performance in real-time PCR applications. This film has a perforated, plastic liner for easy removal prior to use. The film and adhesive both allow for extreme optical clarity and consistency

50 μl 384-well PCR plate with Full skirt. White.

• 384 well x 50 μl
• Dual notch corner at A24, P24
• Standard 384-well block format
• Full Skirt – Automation Friendly
• Designed for Roche® LightCycler 480
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	15 Plates
  Volume	50 μl
  Color	White

2.0 ml 96-well Deep Well Plate. U-Bottom with Round Wells, Clear.

• 2.0 ml capacity. U-Bottom, Round Wells, Clear
• Ideal for high-throughput screening, sample collection, and long-term storage
• Ultra-smooth, polished U-Bottom Wells help minimize sample loss
• Ultra-flat surface ensures optimum seal with films and mats
• Extremely resistant to subzero temperatures, up to -80°C
• Centrifugation up to 4,000 RCF
• Standard SBS footprint
• Autoclavable
• Stackable 

Certified DNase and RNase free. Non-pyrogenic.

The SF-AS-400 combines an aluminum film with a durable acrylic adhesive. This film is pierceable and allows easy, clean sample access without coring or adhesive removal. The film is intended for long-term storage use and has a perforated liner for easy removal prior to use.

• Aluminum Sealing Film with acrylic adhesive
• Intended for long-term storage applications
• Pierceable design allows for use in automated setups and easy, manual sample access
• Strong adhesive ensures minimum evaporation and contamination
• Resistant to a wide range of temperatures
• Easy-peel, perforated liner
• Compatible with all 96-well and 384-well plates

 Thickess: 36 μm

Temperature Range: -80 °C to +150°C

 Certified DNase and RNase free. Non-pyrogenic.

Packaging

100 Films

Applications

Long-term storage

Conical Tubes are widely used in laboratories from storage of samples to high speed centrifugation. SPL Life Sciences provides very high strength and non-toxic conical tubes to meet the demands.

Case 10x50 bags

SPL Serological Pipettes are classified by sample volume.
Ascending & descending scales facilitate reading of both dispensing and remaining volume.

0.1 ml Low profile 8-strip Tubes and 8-strip optically clear, flat Caps.

• Thin wall design for efficient heat transfer
• Optically clear, flat Caps for real-time PCR
• Secure cap fit ensures minimum evaporation
• Exceptional clarity for optimum real-time PCR/qPCR results
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Manufactured with 99.9% pure virgin polypropylene
• Designed to fit Bio-Rad® CFX systems
• Compatible with ABI® Fast systems
• Compatible with a variety of real-time instruments that take 0.1 ml 8-strip Tubes

• Packaging	120 Strips
  Volume	0.1 ml
  Color	Clear
  Cap Type	Optically clear for qPCR

50 μl 384-well PCR plate with Full skirt.

• 384 well x 50 μl
• Single notch corner at A24
• Standard 384-well block format
• Full Skirt – Automation Friendly
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Volume	50 μl
  Color	Clear
  Packaging	75 Plates

2.0 ml 96-well Deep Well Plate. U-Bottom with Square Wells, Clear.

• 2.0 ml capacity. U-Bottom, Square Wells, Clear
• Ideal for high-throughput screening, sample collection, and long-term storage
• Ultra-smooth, polished U-Bottom Wells help minimize sample loss
• Ultra-flat surface ensures optimum seal with films and mats
• Extremely resistant to subzero temperatures, up to -80°C
• Centrifugation up to 4,000 RCF
• Standard SBS footprint
• Autoclavable
• Stackable 

Certified DNase and RNase free. Non-pyrogenic.

Sealing Mat for 96-well Deep Well Plate with Round Wells.

Novas Bio Silicone Sealing mats are designed for high throughput screening and storage applications. Made of research-grade silicone, these Mats can be autoclaved, and following a bleach wash and ethanol rinse protocol, they can also be reused. Silicone Sealing Mats, pierceable and self-sealing, are ideal for automated processes and can also be used in subzero environments.

Rubber holder for flask for vortex VT-02 and VT-03

AHN myLab® Magnetic Stirrer is a motor-less stir plate, ideal for applications in research, analytical and biological laboratories, schools, pharmacies, etc. This Magnetic Stirrer features an extremely durable, chemical resistant and corrosion proof stainless steel surface, which is extremely easy to wipe and clean.

AHN myLab® Centrifuge 15000 rpm is ideal for blood centrifugation, clinical applications such as PRP, medical practitioners, hospitals and pathological laboratories. This small centrifuge accelerates samples up to 15596 x g in a quiet and quick way, remaining fully attached to the bench.

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 5 plates.

Swing-out rotor for 32 tubes of 10mL, RCF 3164 x g (includes 32x10mL stainless steel tubes + 32x10mL rubber adapters for tube diameter 13 x length 100 mm + 32 x adapters for tube diameters 13x length 75 mm

Fixed angle rotor for 30 tubes of 15mL, RCF 2729 x g