20 ul Filtered Tip. Low Retention. Sterile.

Conical Tubes are widely used in laboratories from storage of samples to high-speed centrifugation. SPL Life Sciences provides very high strength and non-toxic conical tubes to meet the demands.

Case 20x25 bags

50 μl 384-well PCR plate with Full skirt.

• 384 well x 50 μl
• Single notch corner at A24
• Standard 384-well block format
• Full Skirt – Automation Friendly
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	15 Plates
  Volume	50 μl
  Color	Clear

0.1 ml Low profile 8-strip Tubes and 8-strip optically clear, flat Caps. White Tubes.

• Thin wall design for efficient heat transfer
• White Tubes provide enhanced fluorescence
• Optically clear, flat Caps for real-time PCR
• Secure cap fit ensures minimum evaporation
• Exceptional clarity for optimum real-time PCR/qPCR results
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Manufactured with 99.9% pure virgin polypropylene
• Designed to fit Bio-Rad® CFX systems
• Compatible with ABI® Fast systems
• Compatible with a variety of real-time instruments that take 0.1 ml 8-strip Tubes

• Packaging	120 Strips
  Volume	0.1 ml
  Color	White
  Cap Type	Optically clear for qPCR

Fixed angle rotor for 30 tubes of 15mL, RCF 2729 x g

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 10 flasks.

SPL3D™ Cell Floater is a culture vessel that provides an optimized enviroment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 20 plates.

1.75 ml Clear Snap-lock Microcentrifuge Tube.

• 1.75 ml volume
• Thumb-friendly Snap-lock Cap provides tight seal, yet remains easy to open
• Frosted, flat Cap and frosted panel on Tube with writeable surfaces
• Manufactured with 99.9% pure virgin polypropylene
• Graduation marks molded in place for accuracy
• Perfect clarity facilitates visibility of pellet
• Ultra smooth tube bottoms
• Not-autoclavable

Certified DNase and RNase free. Non-pyrogenic.

0.2 ml 8-strip PCR Tubes with attached frosted, flat Caps.

• Thin wall design for efficient heat transfer
• Frosted, flat Caps with writeable surface
• Clear Tube with exceptional clarity for maximum sample visibility
• Secure Cap fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Available in a variety of Cap styles:
  • 0.2 ml 8-strip PCR Tubes with attached Optically clear, flat Caps for qPCR
  • 0.2 ml 8-strip PCR Tubes with attached Optically clear, flat Caps with recessed window for qPCR

  • Packaging	120 Strips
    Volume	0.2 ml
    Color	Clear
    Cap Type	Frosted

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 5 plates.

Swing-out plate rotor for 2 microplates with 96 wells, RCF 2355 x g

The SF-AS-400 combines an aluminum film with a durable acrylic adhesive. This film is pierceable and allows easy, clean sample access without coring or adhesive removal. The film is intended for long-term storage use and has a perforated liner for easy removal prior to use.

• Aluminum Sealing Film with acrylic adhesive
• Intended for long-term storage applications
• Pierceable design allows for use in automated setups and easy, manual sample access
• Strong adhesive ensures minimum evaporation and contamination
• Resistant to a wide range of temperatures
• Easy-peel, perforated liner
• Compatible with all 96-well and 384-well plates

 Thickess: 36 μm

Temperature Range: -80 °C to +150°C

 Certified DNase and RNase free. Non-pyrogenic.

Packaging

100 Films

Applications

Long-term storage

8-strip Caps for use with 0.2 ml 8-strip Tubes.

• Optically clear, flat Caps with recessed window for real-time PCR
• Recessed window minimizes finger contact, resulting in an enhanced signal
• Exceptional clarity for optimum real-time PCR/qPCR results
• Precision-molded design provides seamless application and removal
• Secure fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Available in a variety of styles:
  • Optically clear, flat 8-strip Caps for qPCR
  • Frosted, flat 8-strip Caps for writing

  • Packaging	125 Strips
    Cap Type	Optically clear for qPCR, with recessed window

The SF-UC-500 combines an optically clear polyolefin layer with a strong, ultra-smooth, non-absorbing, non-fluorescing medical-grade silicone adhesive for superior performance in real-time PCR applications. This film has a perforated, plastic liner for easy removal prior to use. The film and adhesive both allow for extreme optical clarity and consistency

The 3D CellFate® matrices developed by Biocelltis are biomaterials made up by natural polymeric nanofibers from 50 to 100nm in diameter, similar to human collagen, biocompatible, sterile and ready-for-use, ideal for growing human and animal cells in research labs. Biocelltis offers 3D CellFate® matrices for a wide range of shapes and sizes of culture plates for routine use in laboratories, in addition to customized solutions.

SPL Serological Pipettes are classified by sample volume.

Ascending & descending scales facilitate reading of both dispensing and remaining volume.

Case 400 pipettes

AHN myDpette® Bottle Top Dispenser is designed to handle a wide range of liquids with precision and accuracy. Thanks to the recirculating safety valve that channels reagent waste back into the bottle during priming, AHN myDpette® Bottle Top Dispenser is one of the most eco-friendly bottle top dispensers ensuring safety and savings.