1000 ul Filtered Tip. Extended Length. Low Retention. Sterile.

Culture flasks of SPL Life Sciences are ergonomically designed for easy handling, while achieving minimal contamination during cell culture. Short, wide and angled neck design enables easy access of serological pipettes and cell scrapers.

Case 100 flasks.

AHN myLab® Magnetic Stirrer is a motor-less stir plate, ideal for applications in research, analytical and biological laboratories, schools, pharmacies, etc. This Magnetic Stirrer features an extremely durable, chemical resistant and corrosion proof stainless steel surface, which is extremely easy to wipe and clean.

Therma Seal 200, general application Sealing Film.

The SF-TS-200 is a polyester film intended for general storage applications. This film has a perforated liner for easy removal prior to use.

• Polyester Sealing Film with adhesive
• Intended for general storage applications
• Ensures minimum evaporation and contamination
• Resistant to a wide range of temperatures
• Easy-peel, perforated liner
• Compatible with all 96-well and 384-well plates

 Thickness: 54 μm

Temperature Range: -40 °C to +120 °C

 Certified DNase and RNase free. Non-pyrogenic.

8-strip Caps for use with 0.2 ml 8-strip Tubes.

• Frosted, flat Caps for Standard PCR
• Writeable surface provides easy sample identification
• Precision-molded design provides seamless application and removal
• Secure fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	125 Strips
  Cap Type	Frosted

0.1ml Hard Shell PCR Plate. Skirted. Low Profile. White frame, White wells. RNase/DNase/Human DNA free/Non-pyrogenic.

AHN myLab® Centrifuge 15000 rpm is ideal for blood centrifugation, clinical applications such as PRP, medical practitioners, hospitals and pathological laboratories. This small centrifuge accelerates samples up to 15596 x g in a quiet and quick way, remaining fully attached to the bench.

50 μl 384-well PCR plate with Full skirt.

• 384 well x 50 μl
• Single notch corner at A24
• Standard 384-well block format
• Full Skirt – Automation Friendly
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	15 Plates
  Volume	50 μl
  Color	Clear

1.75 ml Clear Snap-lock Microcentrifuge Tube.

• 1.75 ml volume
• Thumb-friendly Snap-lock Cap provides tight seal, yet remains easy to open
• Frosted, flat Cap and frosted panel on Tube with writeable surfaces
• Manufactured with 99.9% pure virgin polypropylene
• Graduation marks molded in place for accuracy
• Perfect clarity facilitates visibility of pellet
• Ultra smooth tube bottoms
• Not-autoclavable

Certified DNase and RNase free. Non-pyrogenic.

AHN myDpette® Bottle Top Dispenser is designed to handle a wide range of liquids with precision and accuracy. Thanks to the recirculating safety valve that channels reagent waste back into the bottle during priming, AHN myDpette® Bottle Top Dispenser is one of the most eco-friendly bottle top dispensers ensuring safety and savings.

0.1 ml Low profile 8-strip Tubes and 8-strip optically clear, flat Caps.

• Thin wall design for efficient heat transfer
• Optically clear, flat Caps for real-time PCR
• Secure cap fit ensures minimum evaporation
• Exceptional clarity for optimum real-time PCR/qPCR results
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Manufactured with 99.9% pure virgin polypropylene
• Designed to fit Bio-Rad® CFX systems
• Compatible with ABI® Fast systems
• Compatible with a variety of real-time instruments that take 0.1 ml 8-strip Tubes

• Packaging	120 Strips
  Volume	0.1 ml
  Color	Clear
  Cap Type	Optically clear for qPCR

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 5

AHN myDpette® Bottle Top Dispenser is designed to handle a wide range of liquids with precision and accuracy. Thanks to the recirculating safety valve that channels reagent waste back into the bottle during priming, AHN myDpette® Bottle Top Dispenser is one of the most eco-friendly bottle top dispensers ensuring safety and savings.

SPL Serological Pipettes are classified by sample volume.

Ascending & descending scales facilitate reading of both dispensing and remaining volume.

Case 400 pipettes

Fixed angle rotor for 24 tubes of 15mL, RCF 2852 X g

SPL3D™ Cell Floater is a culture vessel that provides an optimized enviroment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 20 plates.

PN: 7-000-01-0

AHN myLab® Centrifuge 6000 rpm is compact and powerful. It accelerates microtubes up to 2000 g in a matter of seconds, quietly and remaining firmly attached to your benchtop. The ultimate choice for any lab!