6x50mL swing rotor with stainless steel tubes

Conical Tubes are widely used in laboratories from storage of samples to high-speed centrifugation. SPL Life Sciences provides very high strength and non-toxic conical tubes to meet the demands.

Case 20x25 bags

50 μl 384-well PCR plate with Full skirt.

• 384 well x 50 μl
• Single notch corner at A24
• Standard 384-well block format
• Full Skirt – Automation Friendly
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	15 Plates
  Volume	50 μl
  Color	Clear

Conical Tubes are widely used in laboratories from storage of samples to high speed centrifugation. SPL Life Sciences provides very high strength and non-toxic conical tubes to meet the demands.

Case 10x50 bags

0.2 ml PCR Tube with attached optically clear, flat Cap with recessed window.

• Thin wall design for efficient heat transfer
• Optically clear, flat Cap features a recessed window for real-time PCR
• Recessed window minimizes finger contact, resulting in an enhanced signal
• Exceptional clarity for optimum real-time PCR/qPCR results
• Secure Cap fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

SPL Serological Pipettes are classified by sample volume.
Ascending & descending scales facilitate reading of both dispensing and remaining volume.

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 5 plates.

Culture flasks of SPL Life Sciences are ergonomically designed for easy handling, while achieving minimal contamination during cell culture. Short, wide and angled neck design enables easy access of serological pipettes and cell scrapers.

Case 100 flasks.

1.5 ml Clear Snap-lock Microcentrifuge Tube.

• 1.5 ml volume
• Thumb-friendly Snap-lock Cap provides tight seal, yet remains easy to open
• Frosted, flat Cap and frosted panel on Tube with writeable surfaces
• Manufactured with 99.9% pure virgin polypropylene
• Graduation marks molded in place for accuracy
• Perfect clarity facilitates visibility of pellet
• Ultra smooth tube bottoms
• Autoclavable

 Certified DNase and RNase free. Non-pyrogenic.

50 μl 384-well PCR plate with Full skirt. White.

• 384 well x 50 μl
• Dual notch corner at A24, P24
• Standard 384-well block format
• Full Skirt – Automation Friendly
• Designed for Roche® LightCycler 480
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	75 Plates
  Volume	50 μl
  Color	White

• 100 ul Filtered Tip
• Racked in 96-well format
• Manufactured with 99.9% pure virgin polypropylene
• Aerosol barrier tip prevents aerosol and liquid contamination
• Graduation marks allow for visual confirmation of draw volume
• Engineered to fit most universal single and multi-channel Pipettors
• Certified DNase/RNase free and non-pyrogenic
• Low Retention for maximum sample recovery
• Pre-sterilized by gamma irradiation

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 5

0.2 ml 8-strip PCR Tubes with attached frosted, flat Caps.

• Thin wall design for efficient heat transfer
• Frosted, flat Caps with writeable surface
• Clear Tube with exceptional clarity for maximum sample visibility
• Secure Cap fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Available in a variety of Cap styles:
  • 0.2 ml 8-strip PCR Tubes with attached Optically clear, flat Caps for qPCR
  • 0.2 ml 8-strip PCR Tubes with attached Optically clear, flat Caps with recessed window for qPCR

  • Packaging	120 Strips
    Volume	0.2 ml
    Color	Clear
    Cap Type	Frosted

12-well cell culture plates, treated for adherence, sterile, made of high-clarity polystyrene assuring optimal visualization. SPL Lifesciences multi-well plates are compliant with USD and ANSI guidelines.

Case 50 plates.

SPL3D™ Cell Floater is a culture vessel that provides an optimized enviroment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 20 plates.

Foam platform for 96 wells microplates for vortex VT-02 and VT-03

0.2 ml Half skirt 96-well PCR plate.

• 96 well x 0.2 ml
• Standard profile
• Single notch corner at A12
• High contrast alphanumeric lettering
• Thin wall design for efficient heat transfer
• Exceptional clarity for maximum sample visibility
• Raised wells for optimum seal and minimized evaporation
• Semi-skirted design allows for barcoding and labeling
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	10 Plates
  Volume	0.2 ml
  Color	Clear