Microplates Swing rotor, RCF 2355 x g

Swing-out rotor for 16 tubes of 15mL, RCF 3485 x g

0.1 ml Low profile, Semi-skirted 96-well PCR plate with elevated skirt for ABI.

• 96 well x 0.1 ml
• Low profile
• Single notch corner at A1
• Fits ABI Fast Cyclers
• Thin wall design for efficient heat transfer
• Exceptional clarity for maximum sample visibility
• Raised wells for optimum seal and minimized evaporation
• Semi-skirted design allows for barcoding and labeling
• Elevated skirt around plate provides optimum fit with ABI blocks
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	20 Plates
  Volume	0.1 ml
  Color	Clear

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

CAse 20 plates

AHN myDpette® Bottle Top Dispenser is designed to handle a wide range of liquids with precision and accuracy. Thanks to the recirculating safety valve that channels reagent waste back into the bottle during priming, AHN myDpette® Bottle Top Dispenser is one of the most eco-friendly bottle top dispensers ensuring safety and savings.

1.5 ml Clear Snap-lock Microcentrifuge Tube.

• 1.5 ml volume
• Thumb-friendly Snap-lock Cap provides tight seal, yet remains easy to open
• Frosted, flat Cap and frosted panel on Tube with writeable surfaces
• Manufactured with 99.9% pure virgin polypropylene
• Graduation marks molded in place for accuracy
• Perfect clarity facilitates visibility of pellet
• Ultra smooth tube bottoms
• Autoclavable

 Certified DNase and RNase free. Non-pyrogenic.

AHN myLab® Centrifuge 15000 rpm is ideal for blood centrifugation, clinical applications such as PRP, medical practitioners, hospitals and pathological laboratories. This small centrifuge accelerates samples up to 15596 x g in a quiet and quick way, remaining fully attached to the bench.

The 3D CellFate® matrices developed by Biocelltis are biomaterials made up by natural polymeric nanofibers from 50 to 100nm in diameter, similar to human collagen, biocompatible, sterile and ready-for-use, ideal for growing human and animal cells in research labs. Biocelltis offers 3D CellFate® matrices for a wide range of shapes and sizes of culture plates for routine use in laboratories, in addition to customized solutions.

Conical Tubes are widely used in laboratories from storage of samples to high speed centrifugation. SPL Life Sciences provides very high strength and non-toxic conical tubes to meet the demands.

Case 10x50 bags

1.1 ml 96-well Deep Well Plate. U-Bottom with Round Wells, Clear.

• 1.1 ml capacity. U-Bottom, Round Wells, Clear
• Ultra-low profile for reduced space requirements
• Ideal for high-throughput screening, sample collection, and long-term storage
• Ultra-smooth, polished U-Bottom Wells help minimize sample loss
• Ultra-flat surface ensures optimum seal with films and mats
• Extremely resistant to subzero temperatures, up to -80°C
• Centrifugation up to 4,000 RCF
• Standard SBS footprint
• Autoclavable
• Stackable 

Certified DNase and RNase free. Non-pyrogenic.

0.2 ml 8-strip PCR Tubes with attached frosted, flat Caps.

• Thin wall design for efficient heat transfer
• Frosted, flat Caps with writeable surface
• Clear Tube with exceptional clarity for maximum sample visibility
• Secure Cap fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Available in a variety of Cap styles:
  • 0.2 ml 8-strip PCR Tubes with attached Optically clear, flat Caps for qPCR
  • 0.2 ml 8-strip PCR Tubes with attached Optically clear, flat Caps with recessed window for qPCR

  • Packaging	120 Strips
    Volume	0.2 ml
    Color	Clear
    Cap Type	Frosted

Fixed angle rotor for 30 tubes of 15mL, RCF 2729 x g

Culture flasks of SPL Life Sciences are ergonomically designed for easy handling, while achieving minimal contamination during cell culture. Short, wide and angled neck design enables easy access of serological pipettes and cell scrapers.

AHN myLab® Hematocrit Centrifuge is used for determination of volume fractions of erythrocytes (red blood cells) in blood and also for separation of micro blood and solutions. It provides hematocrit values (HCT) for testing in biochemistry, immunity, genetics, blood separation and for general clinical tests.

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 3 flasks.

2.0 ml 96-well Deep Well Plate. V-Bottom with Square Wells, Clear.

• 2.0 ml capacity. V-Bottom, Square Wells, Clear
• Ideal for high-throughput screening, sample collection, and long-term storage
• Efficient ‘V-Bottom’ design allows for complete sample retrieval
• Ultra-flat surface ensures optimum seal with films and mats
• Extremely resistant to subzero temperatures, up to -80°C
• Centrifugation up to 4,000 RCF
• Standard SBS footprint
• Autoclavable
• Stackable 

Certified DNase and RNase free. Non-pyrogenic.

The 3D CellFate® matrices developed by Biocelltis are biomaterials made up by natural polymeric nanofibers from 50 to 100nm in diameter, similar to human collagen, biocompatible, sterile and ready-for-use, ideal for growing human and animal cells in research labs. Biocelltis offers 3D CellFate® matrices for a wide range of shapes and sizes of culture plates for routine use in laboratories, in addition to customized solutions.