Foam for microplate

Therma Seal 200, general application Sealing Film.

The SF-TS-200 is a polyester film intended for general storage applications. This film has a perforated liner for easy removal prior to use.

• Polyester Sealing Film with adhesive
• Intended for general storage applications
• Ensures minimum evaporation and contamination
• Resistant to a wide range of temperatures
• Easy-peel, perforated liner
• Compatible with all 96-well and 384-well plates

 Thickness: 54 μm

Temperature Range: -40 °C to +120 °C

 Certified DNase and RNase free. Non-pyrogenic.

SPL Serological Pipettes are classified by sample volume.

Ascending & descending scales facilitate reading of both dispensing and remaining volume.

Case 400 pipettes

The 3D CellFate® matrices developed by Biocelltis are biomaterials made up by natural polymeric nanofibers from 50 to 100nm in diameter, similar to human collagen, biocompatible, sterile and ready-for-use, ideal for growing human and animal cells in research labs. Biocelltis offers 3D CellFate® matrices for a wide range of shapes and sizes of culture plates for routine use in laboratories, in addition to customized solutions.

SPL3D™ Cell Floater is a culture vessel that provides an optimized enviroment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 20 plates.

0.1 ml Low profile 8-strip Tubes and 8-strip optically clear, flat Caps. White Tubes.

• Thin wall design for efficient heat transfer
• White Tubes provide enhanced fluorescence
• Optically clear, flat Caps for real-time PCR
• Secure cap fit ensures minimum evaporation
• Exceptional clarity for optimum real-time PCR/qPCR results
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Manufactured with 99.9% pure virgin polypropylene
• Designed to fit Bio-Rad® CFX systems
• Compatible with ABI® Fast systems
• Compatible with a variety of real-time instruments that take 0.1 ml 8-strip Tubes

• Packaging	120 Strips
  Volume	0.1 ml
  Color	White
  Cap Type	Optically clear for qPCR

0.2 ml 8-strip PCR Tubes with attached optically clear, flat Caps.

• Thin wall design for efficient heat transfer
• Optically clear, flat Caps for real-time PCR
• Exceptional clarity for optimum real-time PCR/qPCR results
• Secure Cap fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic
• Available in a variety of Cap styles:
  • 0.2 ml 8-strip PCR Tubes with attached Optically clear, flat Caps with recessed window for qPCR
  • 0.2 ml 8-strip PCR Tubes with attached frosted, flat Caps for writing

  • Packaging	120 Strips
    Volume	0.2 ml
    Color	Clear
    Cap Type	Optically clear for qPCR

AHN myLab® Clinical Centrifuge is suitable for separation of blood, serum, plasma, urea, as well as for many other routine applications in a clinical and research lab.

Novas Bio Silicone Sealing mats are designed for high throughput screening and storage applications. Made of research-grade silicone, these Mats can be autoclaved, and following a bleach wash and ethanol rinse protocol, they can also be reused. Silicone Sealing Mats, pierceable and self-sealing, are ideal for automated processes and can also be used in subzero environmen

Culture flasks of SPL Life Sciences are ergonomically designed for easy handling, while achieving minimal contamination during cell culture. Short, wide and angled neck design enables easy access of serological pipettes and cell scrapers.

Case 100 flasks.

Swing-out rotor for 6 tubes of 50mL, RCF 2852 x g,

AHN myDpette® Bottle Top Dispenser is designed to handle a wide range of liquids with precision and accuracy. Thanks to the recirculating safety valve that channels reagent waste back into the bottle during priming, AHN myDpette® Bottle Top Dispenser is one of the most eco-friendly bottle top dispensers ensuring safety and savings.

0.2 ml PCR Tube with attached frosted, flat Cap.

• Thin wall design for efficient heat transfer
• Frosted, flat Cap with writeable surface for standard PCR.
• Clear Tube with exceptional clarity for maximum sample visibility
• Secure Cap fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• 0.2 ml PCR Tube with attached frosted, flat Cap.

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

CAse 20 plates

Universal platform for Vortex VT-02 and VT-03

0.1ml Hard Shell PCR Plate. Skirted. Low Profile. Black frame, Clear wells. RNase/DNase/Human DNA Free. Non-pyrogenic.

0.2 ml PCR Tube with attached optically clear, flat Cap with recessed window.

• Thin wall design for efficient heat transfer
• Optically clear, flat Cap features a recessed window for real-time PCR
• Recessed window minimizes finger contact, resulting in an enhanced signal
• Exceptional clarity for optimum real-time PCR/qPCR results
• Secure Cap fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic