SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 5

• 100 ul Filtered Tip
• Racked in 96-well format
• Manufactured with 99.9% pure virgin polypropylene
• Aerosol barrier tip prevents aerosol and liquid contamination
• Graduation marks allow for visual confirmation of draw volume
• Engineered to fit most universal single and multi-channel Pipettors
• Certified DNase/RNase free and non-pyrogenic
• Low Retention for maximum sample recovery
• Pre-sterilized by gamma irradiation

0.1 ml Low profile, Non-skirted 96-well PCR plate. White.

• 96 well x 0.1 ml
• Low profile
• Dual notch corner at A12, H12
• Non-skirted, flat-top design provides broad compatibility
• White color provides increased autofluorescence
• Thin wall design for efficient heat transfer
• Exceptional clarity for maximum sample visibility
• Raised wells for optimum seal and minimized evaporation
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	10 Plates
  Volume	0.1 ml
  Color	White

AHN myDpette® Bottle Top Dispenser is designed to handle a wide range of liquids with precision and accuracy. Thanks to the recirculating safety valve that channels reagent waste back into the bottle during priming, AHN myDpette® Bottle Top Dispenser is one of the most eco-friendly bottle top dispensers ensuring safety and savings.

SPL Serological Pipettes are classified by sample volume.

Ascending & descending scales facilitate reading of both dispensing and remaining volume.

Case 400 pipettes

Culture flasks of SPL Life Sciences are ergonomically designed for easy handling, while achieving minimal contamination during cell culture. Short, wide and angled neck design enables easy access of serological pipettes and cell scrapers.

SPL3D™ Cell Floater is a culture vessel that provides an optimized environment for 3D cell culture. The culture vessel, which is effective for the formation of spheroids of animal cells, does not require any special incubation techniques, and thus 3D cell culture can easily be implemented in the same way as conventional 2D culture. Especially, 96well Round type product is optimized to form single spheroid.

Case 10 plates.

Swing-out rotor for 32 tubes of 10mL, RCF 3164 x g (includes 32x10mL stainless steel tubes + 32x10mL rubber adapters for tube diameter 13 x length 100 mm + 32 x adapters for tube diameters 13x length 75 mm

The 3D CellFate® matrices developed by Biocelltis are biomaterials made up by natural polymeric nanofibers from 50 to 100nm in diameter, similar to human collagen, biocompatible, sterile and ready-for-use, ideal for growing human and animal cells in research labs. Biocelltis offers 3D CellFate® matrices for a wide range of shapes and sizes of culture plates for routine use in laboratories, in addition to customized solutions.

Rubber holder for flask for vortex VT-02 and VT-03

0.2 ml Half skirt 96-well PCR plate.

• 96 well x 0.2 ml
• Standard profile
• Single notch corner at A12
• High contrast alphanumeric lettering
• Thin wall design for efficient heat transfer
• Exceptional clarity for maximum sample visibility
• Raised wells for optimum seal and minimized evaporation
• Semi-skirted design allows for barcoding and labeling
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	10 Plates
  Volume	0.2 ml
  Color	Clear

96-well cell culture plates, treated for adherence, sterile, made of high-clarity polystyrene assuring optimal visualization. SPL Lifesciences multi-well plates are compliant with USD and ANSI guidelines. 

Case 50 plates.

AHN myLab® Centrifuge 15000 rpm is ideal for blood centrifugation, clinical applications such as PRP, medical practitioners, hospitals and pathological laboratories. This small centrifuge accelerates samples up to 15596 x g in a quiet and quick way, remaining fully attached to the bench.

Universal platform for Vortex VT-02 and VT-03

0.2 ml 8-strip PCR Tubes with attached optically clear, flat Caps with recessed window.

• Thin wall design for efficient heat transfer
• Optically clear, flat Caps feature a recessed window for real-time PCR
• Recessed window minimizes finger contact, resulting in an enhanced signal
• Exceptional clarity for optimum real-time PCR/qPCR results
• Secure Cap fit ensures minimum evaporation and contamination
• Manufactured with 99.9% pure virgin polypropylene
• Certified DNase/RNase/Human DNA free and non-pyrogenic

• Packaging	120 Strips
  Volume	0.2 ml
  Color	Clear
  Cap Type	Optically clear for qPCR, with recessed window

Foam for 24 microtubes for Vortex VT-02 and VT-03

AHN myLab® Clinical Centrifuge is suitable for separation of blood, serum, plasma, urea, as well as for many other routine applications in a clinical and research lab.

Pipette comfortably and effortlessly with AHN pipet4u® pro Single Channel Pipette. Enjoy the soft grip handle and light-pressure plunger. All designed to maximize your user comfort and prevent repetitive strain injuries.

Fixed angle rotor for 16 tubes of 15mL, RCF 3144 x g

2.0 ml 96-well Deep Well Plate. U-Bottom with Round Wells, Clear.

• 2.0 ml capacity. U-Bottom, Round Wells, Clear
• Ideal for high-throughput screening, sample collection, and long-term storage
• Ultra-smooth, polished U-Bottom Wells help minimize sample loss
• Ultra-flat surface ensures optimum seal with films and mats
• Extremely resistant to subzero temperatures, up to -80°C
• Centrifugation up to 4,000 RCF
• Standard SBS footprint
• Autoclavable
• Stackable 

Certified DNase and RNase free. Non-pyrogenic.